School LeadersContact

Insight

FIT Reports Explained: The Facility Inspection Tool, Williams Act Facility Compliance, and What Every California School Must Report

November 18, 2026

Under California's Williams Act, every school must document that its facilities are in “good repair,” and the Facility Inspection Tool (FIT) is the instrument the state uses to measure it. This guide explains what a FIT report is, how the Williams Act makes facility condition a legal requirement, the eight areas a FIT evaluates, who needs an inspection and when, how FIT differs from a condition or needs assessment, what happens when a school isn't in good repair, how to choose a provider, and what it costs.

Most facilities documents a California district produces are optional — good practice, but not the law. A FIT report is different. Under the Williams Act, every California public school must document that its facilities are in “good repair,” and the Facility Inspection Tool (FIT) is the instrument the state uses to measure it. The result lands in each school's public accountability report and, for many schools, is verified by an annual county visit.

Because it's a compliance obligation rather than a strategic choice, the FIT report is often treated as a box to check — and done carelessly, it creates real exposure: an inaccurate “good repair” rating that collapses under a county visit or a Williams complaint, or a missed deficiency that becomes a liability. This guide explains what a FIT report is, how the Williams Act makes facility condition a legal requirement, exactly what the Facility Inspection Tool evaluates, who needs one and when, how it differs from a condition or needs assessment, what happens when a school falls short, how to choose a provider, and what it costs.

It's the compliance layer of the broader facilities consulting lifecycle — the one the state actually requires.

What a FIT report is

A FIT report is the completed Facility Inspection Tool — a standardized evaluation, developed by the state's Office of Public School Construction, that rates the physical condition of a school facility and produces an overall “good repair” determination. An inspector walks the site, evaluates each required system area, rates it, and the tool rolls those ratings into a single facility rating of Exemplary, Good, Fair, or Poor.

That rating is not just internal paperwork. It feeds the school's School Accountability Report Card (SARC) — the public document every California school publishes annually — where facility condition must be reported using the FIT or an equivalent instrument. In other words, the FIT result is published, every year, for every school.

The Williams Act: why facility condition is a legal requirement

The FIT exists because of the Williams v. California settlement and the 2004 legislation that followed. The Williams case established that students have a right to three basics: sufficient instructional materials, qualified teachers, and safe, clean, and functional school facilities. The last of those turned facility condition from an operational concern into a legal standard, with a specific definition of “good repair” in the Education Code and a mechanism to enforce it.

Two obligations flow from it. First, every school reports its facility condition annually through the SARC using the FIT. Second, schools in the lowest-performing deciles (historically deciles 1–3) receive an annual visit from the county office of education, which verifies — among other Williams requirements — that facilities are in good repair. A FIT report that doesn't match what the county inspector finds is exactly the kind of gap that creates findings and complaints.

What the Facility Inspection Tool evaluates

The FIT assesses a school across a defined set of system areas, each rated Good, Fair, or Poor, which then drive the overall rating. The areas include:

  • Systems — gas, sewer, and mechanical systems functioning properly.

  • Interior — interior surfaces, floors, ceilings, walls, and window casings.

  • Cleanliness — pest and vermin control, overall cleanliness.

  • Electrical — interior and exterior electrical systems in good working order.

  • Restrooms and fountains — restrooms maintained and operational, drinking fountains working.

  • Safety — fire and emergency systems, hazardous materials, and structural safety conditions.

  • Structural — structural condition and roofing.

  • External — playgrounds, school grounds, windows, doors, gates, and fences.

A single Poor rating in a critical area can pull down the overall determination, which is why an accurate, system-by-system inspection matters more than a quick walk-through. The tool is designed so that two different inspectors evaluating the same school should reach the same rating — but only if the inspection is actually done to the instrument.

Who needs a FIT inspection, and when

  • Every California public school needs a current facility-condition determination for its annual SARC, using the FIT or an equivalent. This is ongoing, every year.

  • Schools in the lowest-performing deciles face an additional annual county-office visit that independently verifies good repair — so the district's own FIT needs to be accurate and defensible, not optimistic.

  • Any school facing a Williams facilities complaint must be evaluated and, if a deficiency affecting health or safety is found, remediated on a tight statutory timeline.

  • Charter schools and schools with new or modernized buildings also need current condition documentation.

The practical answer: a California district needs a reliable, repeatable FIT process every year, for every school — not a scramble when the county visit or a complaint arrives.

FIT report vs. facility condition assessment vs. needs assessment

These overlap but serve different purposes, and districts shouldn't substitute one for another:

  • FIT report is a compliance instrument — a standardized pass/fail-style “good repair” determination required by the Williams Act and reported in the SARC. It answers is this school in good repair under the law?

  • Facility condition assessment is a planning instrument — a deeper, system-by-system evaluation with cost estimates and a Facility Condition Index that answers what will it cost to bring every building up to standard, and in what order?

  • Facility needs assessment is broader still, adding educational adequacy and capacity to the condition picture.

A FIT keeps a district compliant; a condition assessment and needs assessment tell it what to actually do and fund. The strongest districts run the FIT as part of a coordinated program so the compliance inspection and the planning data reinforce each other rather than duplicating effort.

What happens when a school isn't in “good repair”

A Fair or Poor rating, or a deficiency surfaced by a Williams complaint, triggers obligations. Deficiencies that pose an emergency or urgent threat to health or safety carry short statutory remediation deadlines; others must be scheduled and tracked. The complaint process is public and time-bound, and unresolved facilities complaints can escalate. This is why an accurate FIT is protective, not just procedural: it surfaces problems on the district's own timeline, with a documented remediation plan, rather than leaving them to be discovered by a county inspector or a complainant.

How a FIT inspection is done well

The difference between a defensible FIT and a risky one is the same as with any condition work: a real field inspection, done system area by system area, by someone who knows what “good repair” actually requires — versus a rushed visual pass that rates everything “Good” and hopes the county agrees. A strong FIT process is consistent across every school in the district, documents deficiencies with enough detail to drive remediation, and produces a rating that will hold up when an independent inspector walks the same halls. Consistency and documentation are what turn a required form into real protection.

How FIT connects to funding and planning

A well-run FIT isn't a dead end. The deficiencies it documents feed directly into the district's deferred maintenance priorities and, at the portfolio level, into the facilities master plan and bond planning. A district that treats its annual FIT as an input to capital strategy — rather than a form filed and forgotten — gets compliance and planning value from the same inspection. That is the efficient way to run it.

What FIT report services cost

FIT inspections are typically priced per school site, scaling with the number of campuses and their size and complexity. Because the obligation is annual and districtwide, most districts think about it as a recurring program cost rather than a one-off. The fee is modest relative to the exposure it manages: an inaccurate good-repair rating that fails a county visit, or an unremediated health-and-safety deficiency that becomes a complaint or a liability, costs far more than a rigorous inspection. Ask any provider to price the full set of schools and to be clear about what the inspection covers and documents.

How to choose a FIT provider

  1. Is it a real field inspection of every system area at every school, or a quick visual pass?

  2. Will the ratings hold up against an independent county-office visit?

  3. How are deficiencies documented — with enough detail to drive remediation and feed deferred maintenance?

  4. Is the process consistent across all our schools and repeatable year over year?

  5. Does the work connect to planning — can the FIT data feed our deferred-maintenance and master-plan priorities?

  6. Who does the inspecting — people who understand California's good-repair standard and how districts are actually evaluated?

What to do this year

  1. Confirm every school has a current, accurate FIT for its SARC — and that the ratings would survive an independent visit.

  2. Identify your lowest-decile schools that face county-office visits and make sure their FITs are airtight.

  3. Turn FIT deficiencies into a tracked remediation plan, with the health-and-safety items on their statutory timelines.

  4. Feed the FIT data into your deferred-maintenance and capital planning so the required inspection also earns its keep.

Frequently asked questions

What is a FIT report?

A FIT report is a completed Facility Inspection Tool — a standardized state instrument that rates a California school's physical condition across defined system areas and produces an overall “good repair” rating of Exemplary, Good, Fair, or Poor. The result is reported in the school's annual School Accountability Report Card (SARC) and, for lower-performing schools, verified by an annual county-office visit.

What is the Williams Act, and how does it relate to FIT?

The Williams Act is California legislation from the 2004 Williams v. California settlement establishing that students have a right to sufficient instructional materials, qualified teachers, and safe, clean, functional facilities. It made facility condition a legal standard with a defined meaning of “good repair.” The Facility Inspection Tool is the instrument used to measure and document that good-repair standard.

What does the Facility Inspection Tool evaluate?

The FIT evaluates a school across defined system areas — systems (gas/sewer/mechanical), interior surfaces, cleanliness and pest control, electrical, restrooms and fountains, safety (fire, emergency, hazardous materials, structural safety), structural and roofing, and external areas like grounds, windows, doors, and fences. Each area is rated Good, Fair, or Poor, and those ratings drive the overall good-repair determination.

Which California schools need a FIT inspection?

Every California public school needs a current facility-condition determination for its annual SARC, using the FIT or an equivalent. Schools in the lowest-performing deciles receive an additional annual county-office visit that independently verifies good repair, and any school facing a Williams facilities complaint must be evaluated and, if necessary, remediated on a statutory timeline.

What is the difference between a FIT report and a facility condition assessment?

A FIT report is a compliance instrument — a standardized good-repair determination required by the Williams Act and published in the SARC. A facility condition assessment is a deeper planning instrument that evaluates every system in detail, estimates repair costs, and produces a Facility Condition Index to prioritize capital investment. The FIT keeps a district compliant; the condition assessment tells it what to fix and fund, and in what order.

What happens if a school isn't in good repair?

A Fair or Poor rating, or a deficiency raised through a Williams complaint, triggers remediation obligations. Emergency or urgent health-and-safety deficiencies carry short statutory deadlines; others must be scheduled and tracked. An accurate FIT is protective because it surfaces problems on the district's own timeline with a documented remediation plan, rather than leaving them to be found by a county inspector or a complainant.

How much does a FIT inspection cost?

FIT inspections are usually priced per school site, scaling with the number and size of campuses. Because the obligation is annual and districtwide, most districts treat it as a recurring program cost. The fee is modest relative to the exposure it manages — a failed county visit or an unremediated health-and-safety deficiency costs far more than a rigorous, defensible inspection.

Where this fits in the bigger picture

The FIT report is the one facilities document California actually requires — and because it's public and independently verified, it's the one where sloppiness is most exposed. Done right, it's more than compliance: an accurate, consistent FIT protects the district, surfaces problems early, and feeds the deferred-maintenance and capital planning that turn documented deficiencies into funded fixes. For how the condition data behind it drives capital strategy, see our guides to the facility condition assessment and facilities master planning, and the full facilities consulting lifecycle.


School Leaders performs Facility Inspection Tool (FIT) assessments and Williams facility-compliance work for California school districts — accurate, consistent, field-based inspections that hold up to county-office review, with deficiencies documented in a way that feeds deferred maintenance and capital planning. Our advisors are former superintendents, chief business officials, and facilities directors who know California's good-repair standard from the inside. See our FIT report services, the full services overview, or contact our team.

Related reading: Facility Condition Assessment Services | Deferred Maintenance Plans | Facilities Master Planning Services | FIT Report Services

One short note a month on school bonds and facilities

For California superintendents, business officials, and facilities and M&O leaders. Each issue fits where your district is: planning a bond, on the ballot, or running a bond program.

We'll never sell your email. School Leaders may reach out to follow up; you can opt out at any time.

More from the desk

School Board Governance & Leadership Training: What It Covers, When Districts Need It, and How to Choose a Provider

The board–superintendent relationship shapes almost everything a district does — and when it breaks down, superintendents leave, initiatives stall, and the community loses trust. Governance and leadership training is how boards and their leadership teams learn to govern well together. This guide explains what the training covers, who needs it and when, the common formats, the governance models behind it, how to choose a provider, and what it costs.

Read

Facility Condition Assessment Services for K-12 Districts: What an Assessment Includes, the FCI It Produces, and How to Choose a Provider

Every defensible facilities decision — which schools to modernize, how to size a bond, where deferred maintenance dollars go — starts with knowing the real condition of every building. A facility condition assessment produces that baseline and the Facility Condition Index (FCI) that ranks need without politics. This guide explains what a facility condition assessment includes, how it differs from a needs assessment and a master plan, why a field assessment beats a windshield survey, how to choose a provider, and what it costs.

Read

School District Strategic Planning Services: What a Facilitator Does, the Process, and How to Choose One

Most districts have a strategic plan; most of those plans sit on a shelf. Strategic planning services exist to produce the other kind — a board-owned plan with measurable goals, clear ownership, and a tracking rhythm that actually drives decisions. This guide explains what a strategic planning facilitator does, why districts hire one, the process and timeline, how to keep the plan alive after adoption, how to choose a provider, and what it costs.

Read

Ready to apply this in your district?

30-minute call. We'll listen and tell you honestly whether we can help.

Book a discovery call